Home >

0512
2005 Kawasaki ZX12 Ninja
DEPOSIT TO HOLD THIS BIKE HAS BEEN MADE PENDING FINANCING! We are making a list of people to contact incase financing doesn't come through for this customer.
 
Custom ZX12 Priced Right
Sale Price $6,777.77

Quantity in Stock :(Out of Stock)

Product Code: 0512

Description
 


Custom 2005 Kawasaki ZX12 Ninja


As Clean As they Come! 

Aftermarket Parts/Modifications:

- Custom Paint-  White with a Generous Amount of  Blue Pearl (Truly must see in person to appreciate!)

- Muzzy Stainless Steel Full Exhaust System

- Dynojet Power Commander 3

- Black Powder Coated Silver Engraved Swingarm Extensions

- Polished Wheel Lips

- Polished Frame Sliders

- Polished Extended Chain Guard

- Polished Passenger Peg Brackets

- Polished Heel Guards

- Polished Engraved Lowering Links

- Black Anodized/Silver Engraved Roaring Toyz Short Kickstand

- Blue Anodized/Silver Engraved Bar Ends

- Carbon Fiber Look Brake/Clutch Levers

- Flush Mount LED Front Turn Signals

- Shinko Stealth Tires Still Have A Lot of Life Left In them

- Rear Tire Is 200 which is 10mm wider than stock to help this bad boy hook up

- Aluminum Fender Eliminator/Undertail



Buyer's Perks!!

To assist the present and future owner we are offering a one time discount at the time of purchase.  Any parts or accessories purchased the day of the transfer of title will be offered at 5% over dealer cost!  We have the best service rates in the industry and a huge selection of parts and accessories available!  Be it a helmet/apparel, minor modification or full blown custom job this is sure to save you a lot of money!



We are helping a local customer sell his Bike.  You are welcome to come buy and see it in person on our show room floor 9-5:30 central time Mon-Fri at the following address.  Or give us a call at 888-511-BIKE(2453) or send a message to contact or set up an appointment after business hours.

Ball Z Motorsports LLC
100 E Maple St
Plattsburg, MO 64477

We are conveniently located right next to the DMV on the downtown square of Plattsburg. 



We have done a thorough inspection of the bike both mechanically and cosmetically!

Mechanically this Machine is Ready to Go!  The Only Cosmetic imperfection we could find was scratches on the LH bottom of the stator cover pictured below.  Hard to see because it is on the bottom of the LH (kickstand) side of the bike.   This is a 2 owner bike.  The second owner said the bike was already painted when he purchased it.  He added some tasteful modifications to make the bike fit his style and road it for about 2k miles. 

 


Shipping

Shipping arrangements are the buyer's responsibility.  Your welcome to give us a call if you need help in this area.  There are several good shipping companies available and will will assist the buyer in anyway that we are able.
 

Free Transportation from the Airport to our shop!

We are located approximately 45 minutes from MCI Kansas City International Airport.  If you want to fly in and ride it home we'll make it happen for you!

Financing

Ball Z Motorsports LLC does not offer financing in house.  We do work with local banks that can provide you with great service.





Payment Terms & Conditions

Please Read & Understand Before Purchasing!


We are helping a local customer sell this vehicle.   A non-refundable deposit is due at the time of purchasing this listing.  We will accept Paypal or Credit/Debt Card by phone for the deposit.  The remaining balance is to be paid by Certified Check, Cashiers Check, Personal Check or Wire Transfer.  The remaining balance can be paid by Paypal or Credit/Debt card but a 3% fee will apply.  If paying using any form of check payment must completely clear the bank before the motorcycle or paperwork is released.  This takes 5-7 business days in most cases.  Once payment is cleared we will process the title work.  A temporary tag can be purchased at the license bureau (conveniently located right next to our shop) if needed.  Ball Z Motorsports LLC in no way shape or form expresses or implies any warranty or guarantee regarding this vehicle or transaction.  We are only here to assist the buyer and seller complete the transaction smoothly. 


Stock Machines Features and Benefits:

Four-Cylinder 1,199cc Engine
- Compact and light weight

- Aluminum cylinders with chrome composite plated bores reduce weight, resist wear and offer superior heat dispersion

- Balancer shaft for smooth running at all rpm

Fuel Injection With Sub Throttles

- Digital fuel injection features sub throttles to smooth power delivery at all rpm

Six-Speed Transmission

- Minimal clearance between gear dogs for better gear engagement

- Clutch damper helps reduce driveline lash

Digital Ignition

- Independent timing control for each cylinder based on data from several engine and atmospheric sensors

- Stick-type ignition coils are compact and lightweight

Fuel Pump/Oil Pump

- Fuel pump regulator mounts on the pump body, eliminating a return line for easier maintenance

Ram Air Intake

- Incorporates ribs to improve Ram Air effect at the sides and offset wind shear from cross breezes

Aerodynamic Cowling

- Wide design and high bubble screen provide extra rider wind protection

- Small, triangular mirrors are mounted low to help improve aerodynamics

- Cover near the front brake lever reduces turbulence behind the windscreen

43mm Inverted Front Fork

- Fully adjustable spring preload, compression and rebound damping

- Stiff settings to prevent front-end dive under braking

- Stepless damping adjusters

Bottom-Link UNI-TRAK® Rear Suspension

- Fully adjustable shock valved for a variety of conditions

- Stepless damping adjusters

- Swingarm pivot positioned low to weight the front wheel

- Swingarm equipped with extruded-aluminum cross brace resulting in added strength

Radial-Mounted Front Disc Brakes

- Mounting points at top and bottom of caliper with bolts inserted through rear of the caliper instead of the side is more rigid, improving brake feel over a wider range of operation

Details

- Handlebars positioned low for a more planted feel

- Friction-reducing sealant on the front brake caliper pistons improves brake feel

- Three-piece lower fairing with solid center insert improves aesthetics



Stock Machines Specifications:

Engine: Four-stroke, DOHC, inline four
Displacement: 1,198cc

Starting: Electric

Bore x stroke: 83.0 x 55.4mm

Compression ratio: 12.2:1

Cooling: Liquid

Carburetion: Fuel injection with 46mm throttle bodies and sub throttles

Ignition: Digital

Transmission: Six-speed

Frame: Aluminum monocoque

Rake / trail: 23.5° / 3.9 in.

Suspension, front: 43mm inverted hydraulic telescopic fork with adjustable compression and rebound damping, adjustable spring preload

Suspension, rear: UNI-TRAK® system with single shock, adjustable compression and rebound damping, adjustable ride height, and adjustable preload

Wheel travel, front: 4.7 in.

Wheel travel, rear: 5.5 in.

Tire, front: 120/70 x 17 tubeless

Tire, rear: 200/50 x 17 tubeless

Front brake: 320mm dual hydraulic discs

Rear brake: 230 single hydraulic disc

Overall length: 82.1 in.

Overall width: 29.1 in.

Overall height: 47.2 in.

Ground clearance: 4.7 in.

Seat height: 32.3 in.

Dry weight: 463 lbs.

Fuel capacity: 5.0 gal.

Wheelbase: 57.1 in.





MUST SEE IN PERSON
!

Pictures Can't Do The Blue Pearl Justice!

 



This is a close up of the only damage we could find on this bike.  It is on the bottom/back side of the LH Stator/Engine Cover and very hard to see as it is on the kickstand side.  If this is something that bothers you we can fix easily and inexpensively for the next owner! Something that most sellers would not mention.  We do not want any surprises at the time of pick up for the lucky owner of this beautiful machine!


Customer Support

888-511-BIKE

888-511-2453


LOW PRICE, FAST SHIPPING!


Attention International Buyers!

Take Note:

Sorry This Vehicle is Only Available to Buyers Within the USA!



BEST PARTS!      BEST PRICES!       BEST CUSTOMER SERVICE!


Share your knowledge of this product with other customers... Be the first to write a review